Dust and dust resistance testing machine

Product Description:

Dust resistance testing machine is used to conduct dust and dust resistance tests on various parts of steam turbines and vehicles. Its main tests include floating dust (F) and flowing dust (C), and the test parts include car lights, instruments, seat belt retracters, seat adjusters, electrical dust covers, steering system shift lever shafts, door locks, etc. to test their dust resistance and safety.

Applicable standards:

The dust test complies with IEC60529, IP5X, IP6X, and there is also a MIL/STD 810D dust and sand resistance test.

Structure and characteristics:

The overall structure of the test box consists of: studio, air duct system, electrical control cabinet, vacuum pump system, and power supply. Convenient for centralized control of vacuum pump, installation of power supply and lower position of the box, and placement of electrical control cabinet on the side of the test box for easy operation,

Working principle of the test box:

Centrifugal fans are the main energy source for dust movement, and the high-speed operation of the fan blades allows dust to be sucked into the fan. Due to the centrifugal force of the fan blades, dust enters the dust pipeline. The wind speed entering the pipeline generally exceeds 7.5m/s (if the wind speed is too low, it will cause dust to settle in the pipeline and cause the test pipe to malfunction). The dust pipeline sprays into the test chamber from the top and passes through the sample at a speed greater than 2m/s. Due to the funnel-shaped shape at the bottom of the work box, the settled dust can slide into the 72X50um filter screen at the bottom. Through the vibration of the vibrating motor, dust smaller than the diameter of the filter mesh is sucked in by the centrifugal fan for reciprocating circulation.

Product features:

1. Uniform synchronous air hammer vibration dust lifting device.

2. Can self calibrate dust concentration from 60mg/m3 to 60000 mg/m3.

3. Temperature and humidity control system inside the box.

4. The static elimination device can avoid a large amount of dust accumulation on the box wall.

5. The automatic dust dehumidification system reduces the moisture content of dust and stabilizes its quality.

6. Can provide EIA, JIS industrial dust, Arizona ash, Portland cement, talcum powder, Kanto sand Wait for dozens of types of respirable dust and non respirable dust.

7. Disposable dust wet bag to ensure user health.

8. Automatic dust recovery device, users can reduce entry into the box for cleaning.

Product parameters:

Studio size: 1000 x 1000 x 1000 mm (depth x width x height)

Internal volume: 1000 L

Temperature adjustment range: 23 ℃± 5 ℃

Metal mesh nominal wire diameter: 50um

Nominal spacing between lines: 75um

Inner box material: (SUS304-2B) 1.2mm stainless steel plate

Test box shell: made of hairline plate electrostatically sprayed plastic

Dust blowing motor: imported, stainless steel shell, strong sealing, low noise, high wind speed

Test box shell: funnel-shaped, adjustable vibration cycle, dust freely flying and falling next to the blowing hole

Observation window: The super large window can observe the status of the sample inside the box when the dust blowing stops

Vacuum pumping system: built-in vacuum pumping system and accessories

Box body

1. The bottom of the studio is equipped with a centrifugal fan, vibration motor, vacuum pump, and power supply

2. Manufacturing of SUS304 inner liner material in the test chamber workshop

Door opening method: single door, equipped with imported double silicone sealing strip in the middle of the door, hidden handle

Structural microcomputer control: The microcomputer control automatically operates according to the set values, achieving high precision and high electricity efficiency in output power

Standard modular design: high compatibility and quality stability of component interoperability