Leather shoe steel hook core performance testing machine

The shoe steel hook core bending test machine is mainly used to test the bending resistance of the steel hook core. The hook core is inserted into the fixture and rotated 180 degrees around a center column with a diameter of less than 10mm for bending testing. The hook core condition is visually inspected for fracture, and the surface cracks are observed to determine its quality. This machine complies with standards such as GB 28011-2011.

Used to test the bending performance of steel hooks and conduct a 180 ° bending test on the hooks, while observing the surface cracks

The shoe steel hook core bending test machine is mainly used to test the bending resistance of the steel hook core. The hook core is inserted into the fixture and rotated 180 degrees around a center column with a diameter of less than 10mm for bending testing. The hook core condition is visually inspected for fracture, and the surface cracks are observed to determine its quality. The principle is to fix the heel end of the hook center, load the front end to produce bending deformation, and then measure the bending deflection of the hook center to calculate its bending stiffness.

Product features:

This instrument is lightweight, durable, easy to operate, and easy to maintain. It can quickly measure the accurate hook stiffness during measurement.

Compliant with standards:

QB/T 1917-2000 Steel Hooks for Leather Shoes, GB/T 28011-2021 Hooks for Footwear, etc.

Technical parameters:

Bending angle: 180 degrees

Bending column diameter: É 10mm

Driving method: electric

Machine volume: approximately 40 * 35 * 30cm

Weight: approximately 35kg

Power supply: AC220V 50HZ