Site: Home > Home > News and events

Rubber low-temperature brittleness testing machine

2024-05-06 17:21

The rubber and plastic ultra-low temperature brittleness testing machine is used to measure the temperature at which rubber and plastic specimens are subjected to impact damage under specified conditions, which is known as the brittleness temperature. It can compare the performance of non hard plastics and other elastic materials under low temperature conditions, and evaluate the advantages and disadvantages of temperature and low temperature performance. Therefore, it is indispensable in the control of scientific research materials and production processes.

This instrument is a compressor refrigeration equipment designed and developed according to GB/T 15256 and GB/T5470 standards. This equipment adopts a cascade compressor refrigeration technology, utilizing the principle of thermal balance and cyclic stirring method, to achieve automatic and uniform cooling and constant temperature of the sample. This equipment is divided into two types: rubber low-temperature brittleness testing machine and plastic low-temperature brittleness testing machine.

Technical parameters:

1. Temperature control range: -80 ℃ (room temperature ≤ 25 ℃) (there are three models available for customers to choose from: -60, -70, -80 ℃)

2. Cooling rate:

0 ℃~-20 ℃ 1.2 ℃/min

-20 ℃~-30 ℃ 1.0 ℃/min

-30 ℃~-60 ℃ 0.7 ℃/min

-40 ℃~-60 ℃, about 0.7 ℃/min

-60 ℃~-80 ℃, about 0.5 ℃/min

Note: The usage environment is at room temperature (23-25 ℃), and the compressor's temperature dissipation effect can be maintained during operation. The side doors can be fully opened.

3. After constant temperature, the temperature fluctuation within 3 minutes of the test is less than ± 0.5 ℃

4. External dimensions: 900 x 505 x 800mm (length x width x height)

5. Studio dimensions: 220 x 170 x 70mm (length x width x height)

6. Cooling medium: ethanol or other non freezing liquids

7. Mixing motor: 15W

8. Working power supply 220V~240V, 50Hz, 2kW

Structural principle:

This equipment consists of a refrigeration compressor main body, a heating device, an electronic control box, a cooling tank, a cooling medium circulation system, an automatic alarm device, and other parts. After starting the refrigeration switch, the compressor starts working and the refrigeration system enters the official working state. The refrigeration compressor operates continuously, and as it approaches the set temperature, the heating device in the cooling tank begins to provide heat proportionally to balance the excess cooling generated by the refrigeration system and achieve constant temperature. Stirring can continuously circulate the cooling medium in the cooling tank, ensuring a uniform and consistent temperature.

Related News

2024-05-06Key lifespan testing machine
2024-05-06Rubber low-temperature brittleness testing machine
2024-05-06Heat sealing instrument
2024-05-06Fluorescent whitening agent detector
2024-05-06Paper ring compression strength tester
2024-05-06Paper tensile strength testing machine
2024-04-30Medical mask tensile testing machine
2024-04-30Fire resistance testing device for wires and cables
2024-04-30Fabric surface combustion performance tester
2024-04-30Cross scratch tester (hundred scratch tester)

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |