Site: Home > Home > News and events
Standardization and normalization are very important when it comes to color fastness test methods as they ensure repeatable and comparable test results. Below a......
Gas fume color fastness testing is commonly performed on a wide range of materials, including:1. Textiles: Fabrics, yarns, and fibers made of natural or synthet......
When selecting an instrument for fabric pilling and fluffing testing, there are a few key factors to consider:1. Test Standard: The first consideration is the t......
Here are some examples of test standards or protocols that may be used for the Electronic Crockmeter:1. ISO 105-X12: Textiles -- Tests for colour fastness -- Pa......
Calibrating the Random Tumble Pilling Tester is an important step to ensure the accuracy and reliability of the test results. Here are some general guidelines f......
In addition to using unexposed and exposed samples as controls, there are other environmental factors that can be used as control samples for UV aging test. Her......
Aging test chamber and microwave ovens are two completely different types of equipment that are designed and functionally used for different purposes. An aging ......
When conducting salt spray tests, the following are the general salt spray tester operating procedures:1. Preparation: a. Check the status of the salt spray t......
Before performing the pull test, you should make the following preparations:1. Check the equipment: Make sure the pull tester is in working order. Check whether......
The waterproof performance test of battery air tightness testing equipment is to ensure that the equipment can effectively prevent moisture intrusion in the wor......
There are several other important standards for evaluating mask quality in addition to the standard for evaluating mask flammability. Some of these standards in......
The specific methods and procedures for calibrating laboratory test equipment will vary depending on the type, manufacturer and application of the laboratory te......
The following steps are required to replace the worn parts of the Taber 5750 tester:1. Prepare tools and parts. Prepare the wear parts to be replaced and the co......
The Xenon Lamp Aging Test Chamber is a widely used method for assessing the UV resistance and colorfastness of materials. This test chamber simulates the effect......
Judging the accuracy and reliability of test results generally requires consideration of the following factors:1. Test methods and standards: The selection of t......
Selecting the appropriate test method and standard for wear resistance usually requires consideration of the following factors:1. Material type: Different types......
The Martindale Abrasion Tester is a widely used instrument for measuring the abrasion resistance of fabrics, but it has some limitations that should be consider......
Fabrics that experience linear wear are typically those that are used in applications where they are subjected to repeated friction or rubbing in a straight lin......
The ASTM and ISO test methods for measuring fabric air permeability are similar, but there are some differences between them. These differences include:1. Test ......
There are many regulations and standards related to cable flame retardancy, which vary depending on the country or region. Here are some of the most common ones......
Copyright 2022:Qinsun Instruments Co., Limited
High-end textile tester supplier Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |