Site: Home > Home > News and events

What preparations should be made before the tensile tester test?

2023-07-10 13:12

Before performing the pull test, you should make the following preparations:

1. Check the equipment: Make sure the pull tester is in working order. Check whether the power connection is stable, and confirm whether the sensor and fixture are in good condition. Check the readiness of the control system and data logging system.

2. Sample preparation: Prepare the sample to be tested. Make sure the sample meets the test requirements, such as size, shape, material, etc. Depending on the purpose of the test, select the appropriate jig or fixture to hold the sample.

3. Fixture installation: Install the sample on the fixture of the tensile tester. Make sure the sample is properly secured to avoid movement or loosening during testing. The selection of fixtures should be carried out according to the characteristics of the sample and the test requirements.

10kN Universal Testing Machine.jpg

4. Test parameter setting: Set appropriate test parameters according to test requirements and sample characteristics. These parameters may include pull force magnitude, test speed, number of tests, etc. Make sure the test parameters are set correctly to obtain accurate test results.

5. Calibration Check: If required, perform a calibration check of the tensile tester. Calibration ensures the accuracy and reliability of your tester. Perform calibration operations or contact professional calibration service providers according to equipment requirements and standards.

6. Safety measures: Ensure that necessary safety measures are taken during the test. This may include wearing personal protective equipment such as gloves, goggles, etc. Make sure the testing environment is safe and keep other people away from the testing area.

7. Data Recording and Labeling: Prepare the tools and methods for recording test data. Test results can be recorded using data recording systems, electronic forms, or paper recording forms. Mark the necessary information on the sample, such as sample number, test date, etc.

8. Test plan: Make a test plan, including test sequence, test times, test time, etc. Make sure that the testing process is organized and carried out according to plan.

By doing the above preparations, you can ensure the accuracy and reliability of your pull tests. Please operate according to the specific test requirements and the operation manual of the equipment, and abide by the relevant safety regulations.

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |