Site: Home > Home > News and events

TABER wear tester single station+dual station

2024-04-15 15:51

1、 Product Introduction:

Evaluate the wear resistance of the product by measuring the wear resistance of the material, such as measuring its quality loss, thickness loss, and light transmittance.


2、 Application scope:

Products used for testing flat surfaces, such as suitcases, carpets, cardboard, clothing, glass, plastic coatings, ceramic tiles, metal coatings, paint, varnish, decorative films, high-pressure films, plastics, textiles, elastic floor mats, traffic paint, anodized layers, blankets, electronic components, decorative panels, wax, labels, leather covers, dental materials, automotive interior decorations, resins, furniture, etc.


3、 Product features:

Unique wear process

Place the material to be tested on the turntable, and two grinding wheels press a certain weight on the material to cause it to be worn.

The grinding wheel rotates with the rotating surface of the sample disk, generating relative motion and wear. During the rotation process, the deviation of the grinding wheel shaft relative to the rotating shaft of the turntable generates sliding motion, thus causing material wear.

When the sample with an area of 10x10cm is subjected to wear, the surface material of the sample is worn by full angle particles or silk like fabrics, forming a complete circular ring.

Simulate real usage conditions or meet standard testing conditions

Multiple different wear media and accessories can be selected for different tests

Repeated testing can be conducted on the same material at the same point, with the thickest material of about 0.5 inches being damaged or worn off

Two speeds (60, 72 revolutions per minute), 0-50000 revolutions per minute (can be quickly set to 100, 500, 1000, or 2500 revolutions per minute), and three types of load can be set.

Ensure the stability and accuracy of testing

Strict control ensures reliable results

The selection of grinding wheel abrasives has undergone strict quality control, with high quality and good stability

Vacuum cleaner for removing debris

The suction arm of the vacuum pump is connected to the adjustable device on the back of the instrument through a hinge,

Can precisely adjust the height to adapt to different sample thicknesses

The wear tester complies with CE standards and has CE safety markings


4、 Technical parameters:

-Two speeds: 60 and 72 revolutions per minute

-Revolutions: 0-50000

(Can be quickly set to 100, 500, 1000, or 2500 rpm)

-3 types of loads: 250g, 500g, and 1000g

-Dual voltage switching: 115/230V, 60/50Hz

Related News

2024-04-15Fire resistance testing device for wires and cables
2024-04-15TABER wear tester single station+dual station
2024-04-15Brush type fuzzing and pilling tester
2024-04-12Intelligent flat plate thermal conductivity tester
2024-04-12Carpet combustion tester
2024-04-12hydrostatic head tester
2024-04-12Judge II standard light source color matching light box
2024-04-12Male Warm Body Dummy
2024-04-11Smoke resistance color fastness tester
2024-04-11Hydraulic automatic bursting strength tester

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |