Selection Guide for Skew Check Instrument

The deflection tester uses two positioning axes to rotate the measured part, and the measuring head directly measures the radial runout error of the part in the radial direction of the measured part.

The selection of the deflection tester should be based on the accuracy value and diameter length of the shaft type inspected by the manufacturer. The length is generally divided into models such as 300mm, 500mm, 1000mm, etc., and it should be manufactured according to the requirements according to the data of professional manufacturers.

The main technical parameters of the yaw detection instrument are:

1. The radial circular runout of the Morse No.2 60 ° cone facing the Morse cone is ≤ 0.005mm

2. The parallelism (horizontal and vertical direction) of the axis of the deflection detector to the guide rail within a range of 100mm is ≤ 0.006mm

3. The diameter of the tested part of the deflection tester is 270mm-460mm

4. The deflection detector measures lengths of 300mm, 500mm, 1000mm, 1500m, and 2000mm.

5. Model of the yaw detection device.