Site: Home > Home > News and events

5 requirements for UV aging test sample requirements

2022-02-28 10:06

The UV aging test is a test method to evaluate the resistance of new materials to UV light, usually in the laboratory by the UV Accelerated Weathering Tester. Reproducible and reliable weathering data can be obtained in just a few weeks or months through UV weathering; its short-wavelength UV illumination and condensation cycling system realistically simulates damage to materials such as sunlight, dew, and rain effect.

5 requirements for UV aging test sample requirements:

1. Standard sample size: length 50-150 mm, width 50-75 mm, thickness <10 mm. According to the standard requirements, generally test 3 pieces of each sample (recommended to send 4 pieces, 3 pieces for testing, 1 piece for comparison), If the test sample is more than 3 pieces, the price will be increased;

2. Negotiated quotations for braided belts, special products, larger samples that cannot be cut;

UV Accelerated Weathering Tester

3. The test time under normal conditions is added 3 working days to the test time. If the time is longer (2 weeks or more), factors such as power failure should be considered, and the number of days should be appropriately increased;

4. The test under unconventional conditions is charged per batch; the number of samples is not limited as long as the sample does not exceed the capacity of a single device. Note that before quoting, please confirm whether there is equipment available for testing;

5. If the number of samples is large (more than 8) in the case of packing, the corresponding evaluation fee will be charged according to the situation.

QINUNS is a professional UV Accelerated Weathering Tester manufacturer. If you want to know more about UV aging test related skills, please follow us and leave me a message!

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |