Site: Home > Home > News and events

ozone aging test chamber structure and application

2021-10-19 12:02

Ozone aging test chamber applications:

Ozone aging test chamber The series of products are suitable for the aging cracking test of non-metallic materials and rubber products.

Ozone aging test chamber structure:

1. The outer chamber is made of A3 steel plate, and the surface of the shell is sprayed with plastic, which is more polished and beautiful.
2. The inner liner is imported mirror stainless steel plate. 
3. Insulation material: high-density glass fiber wool. 
4. stirring system: the use of long-shaft fan motor, high and low temperature stainless steel multi-wing impeller, in order to achieve the strength of convection vertical diffusion cycle. 
5. the door and the box between the use of double high temperature resistant high tensile sealing strip to ensure that the test area airtight
6. The bottom of the machine adopts high quality fixed PU movable wheels.
7. The observation window is made of multi-layer hollow tempered glass, and the inner side is glued with sheet type conductive film.
8. Built-in 360 degree rotating sample holder (rotation speed 1 rpm)

Ozone aging test chamber
Ozone system:
1, ozone generator for the silent discharge tube ozone generator (with small noise volume, high purity characteristics)
2, electrode cooling method: air-cooled
3, ozone generation gas supply source: air
4, ozone detection probe for the imported British CT electrochemical sensor and shell, electronic circuit board, shielding wire and other components.
5, ozone detection probe output signal: 4 ~ 20mA
6, ozone detection probe collection accuracy: ≤ ± 5% F.S
Refrigeration system:
1、compressor: fully enclosed France Taikang 1 set
2、Refrigeration mode: air-cooled
3、Refrigerant: R404A
4、The whole system pipeline are ventilated and pressurized for 48H to pick up the leakage test.
5、Heating and cooling system is completely independent
6、Internal spiral refrigerant copper pipe.
7、Slope type evaporator
8、 filter drier, refrigerant flow window, repair valve, oil separator, solenoid valve, liquid storage cylinder are imported original parts


Ozone-resistant aging test chamber technical parameters:

1. ozone concentration: 0~500pphm

2. Temperature range: 0℃~70℃

3. temperature fluctuation: ±0.5℃

4. temperature deviation: ≤ ± 2 ℃

5. refrigeration system: imported refrigeration compressor fast cooling

6. standard specimen static stretching fixture; (GB/T 7762-2003,ISO1431/2)

7. standard test piece dynamic tensile jig; (GB/T 13642-92,ISO1431/2)

8. dynamic fatigue fixture for rubber hose; (customized)

9. dynamic fixture for special rubber products; (customized)

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |