Short band ultraviolet radiation illuminometer

Product Introduction:

The short wavelength ultraviolet radiation illuminometer is mainly used for testing low intensity ultraviolet lamps, crawler bulbs, and sterilization instruments that come in from outside the window. It can be used to test the intensity and aging of UVC lamps, UV resistant lenses, etc., and has a wide range of applications.

This instrument is widely used in industries such as precision instruments, household appliances, and public facility testing.

Product Description:

Silicon carbide (SiC) photodiodes are packaged in sealed ultraviolet glass window covers.

Interference filter blocking UVA and UVB response spectral sensitivity curve display

Product operation:

Press and hold the switch button on the front of the solar radiometer. Align the sensor section at the top of the panel directly with the ultraviolet light source. The reading will be displayed on the LCD, and if necessary, the reading can be recorded.

During operation, the battery voltage is between 9V-6.5V. When the voltage is below 6.5V, the LCD reading will start to blur, and the battery needs to be replaced. In "typical" mode, the battery can be used for about 2 years.

Product features:

This instrument contains an integrated sensor, which is easy to operate and durable. The test reading is accurate, and the data can be directly displayed on the LCD.

Technical parameters:

Radiation range: 0-1999? W/cm? UVC

Response: 254 ± 8 nm

Broadband: 246-262 nm

Resolution: 1? W/cm?

Update speed: 3.0 Readings/Sec

Display: 3.5 Digital LCD

Number size: 0.4 inch high

Operating temperature: 32 ° F to 90 ° F

Operating humidity: 5% to 80% RH

Accuracy: ± 10% REF.NIST

Dimensions: 4.2L x 2.4W x 0.9D (in.)

Weight: 4.5 OZ. (included. bat.)

Power supply: 9-Volt DC Battery

Lens: UV Glass

Diffuser: None

Sensor: SiC/Shortpass I.F