Medical mask tensile testing machine

1、 Product Introduction:

The medical mask tensile testing machine is mainly used to conduct tensile tests on various types of masks and protective clothing such as medical masks, disposable masks, protective goggles, and protective clothing. It can also perform mechanical performance tests on plastic, woven bags, non-woven fabrics, plastic films, products, PVC pipes, paper and cardboard, woven bags, packaging belts, tapes, adhesives, and other products, such as tensile, tear, elongation, peeling, etc.

2、 Mask detection:

Mask types: 10N for 10 seconds;

Disposable face mask: 50N for 10 seconds;

Replaceable face mask: 50N for 10 seconds;

Full face mask: 150N for 10 seconds.

3、 Applicable standards:

YY/T 0469-2011 Medical Surgical Masks

YY/T 0969-2013 Disposable Medical Masks

GB/T 19083-2010 Technical Requirements for Medical Protective Masks

GB/T 32610-2016 Technical Specification for Daily Protective Masks

GB/T 2626-2019 Respiratory protection: Self suction filter type particulate matter respirator

GB/T 19082-2009 Technical Requirements for Medical Disposable Protective Clothing

GB/T 10213-2006 Disposable Medical Rubber Inspection Gloves

4、 Technical parameters:

1. Accuracy level: 0.5 level;

2. Optional range: 5-2000N;

3. Effective force measurement range: 0.2/100-100/%;

4. Selection of units for experimental results: GF, kgf, N, KN, LB;

5. Test force resolution, load 500000 yards: without dividing the inside and outside, and the resolution remains unchanged throughout the entire process;

6. Effective test width: 150mm, effective tensile space: 800mm;

7. Test speed: 0.01~500mm/min (adjustable at will);

8. Speed accuracy:± of the displayed value; Within 0.5%;

9. Displacement measurement accuracy:± of the indicated value; Within 0.5%;

10. Deformation measurement accuracy:± Within 0.5%;

11. Power supply: 200V, 400W.