Site: Home > Home > News and events

What is Din 53516 rubber testing?

2023-09-06 11:05

DIN 53516 is a standard that specifies a testing method for determining the abrasion resistance of rubber compounds. It is commonly referred to as the "Rubber Abrasion Resistance (DIN Abrasion) Test." This test is widely used in the rubber industry to assess the durability and wear performance of rubber materials.

In the DIN 53516 test, a flat specimen of rubber is subjected to abrasive wear by a rotating cylindrical drum covered with abrasive material. The specimen is clamped to the drum, and as it rotates, it rubs against the abrasive surface. The test measures the volume loss or weight loss of the specimen due to the abrasive action.

The test parameters, such as the rotational speed of the drum, the applied load or pressure, and the test duration, can be set according to the specific requirements or standards. The test can be conducted under dry or wet conditions, depending on the intended application of the rubber material.

After the test, the specimen is examined for any visible signs of wear, such as loss of material, cracking, or surface damage. The results of the test can be used to compare the abrasion resistance of different rubber compounds and to determine their suitability for specific applications.

The DIN 53516 rubber testing method provides a standardized way to evaluate the abrasion resistance of rubber materials and allows manufacturers to ensure the quality and performance of their rubber products. It is important to note that DIN 53516 is just one of many testing standards available for rubber abrasion testing, and other test methods may be suitable depending on specific requirements and industry standards.

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |