Site: Home > Home > News and events
Common ozone aging test methods include the following:
1. Static Ozone Aging Test: This is one of the commonly used ozone aging test methods. During the test, the sample is usually suspended in a closed test chamber and ozone gas is introduced into the chamber and exposed to the sample. The sample is exposed to ozone gas under certain temperature and humidity conditions to simulate ozone exposure in a real environment.
1. Dynamic Ozone Aging Test: This method simulates the dynamic ozone exposure of a material in actual use. The sample is passed through a recirculation system in which ozone gas comes into contact with the surface of the sample and is then recovered and re-circulated. This method is closer to actual conditions and provides more accurate ozone aging results.
1. UV Light Ozone Aging Test: This test method combines ozone exposure with UV radiation. Samples are exposed to a test chamber containing ozone gas and a UV light source, and are subjected to both ozone aging and accelerated aging by UV radiation.
1. Simulation of Actual Use Conditions: This method uses specific equipment and experimental conditions to simulate the ozone exposure that a material may encounter in actual use. It may include control of factors such as temperature, humidity, oxygen concentration, ozone concentration, and exposure time.
These ozone aging test methods can be selected based on specific application requirements and test criteria. When performing ozone aging tests, the relevant test standards or specifications should be followed to ensure the reliability and repeatability of the tests.
Copyright 2022:Qinsun Instruments Co., Limited
High-end textile tester supplier Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |