Taber 5135 Abrasion Resistance Tester Complies with Standards

The Taber 5135/5155 Abrasion Resistance Tester has a wide range of standard applications and is used for screening and testing the abrasion resistance of materials in industries such as rubber, print, flooring, paint, textiles, automotive, aluminium alloys and building materials. Contact Ungaier on 18566398802 for information on your industry standard.

Taber 5135 Abrasion Resistance Tester conforms to the standard as well as the name

AA-56032D "Trade Description Ink, Marking, Epoxy Base

ANSI / ISEA 105 "American National Standard for Selection of Hand Protection

ANSI / SAE Z26.1 "Window Glazing for Safety Glass Motor Vehicles and Motor Vehicle Equipment

ANSI INCITS 322 "Test Methods for Card Durability

AS / NZS 1580.403.2 "Paints and Related Materials - Test Methods

AS / NZS 4266.20 "Recycled Manufactured Panels - Methods of Test

AS 2001.2.28 Test Methods for Textiles

ASTM B607 "Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Purposes

ASTM B733 "Standard Specification for Autocatalytic Electroless Nickel-Phosphorus Coatings on Metals

ASTM B893《Standard Specification for the Anodic Oxidation of Hard Coatings of Magnesium for Engineering Purposes

ASTM C1353 "Standard Test Method for Determination of Abrasion Resistance of Walking Size Stones by Tabor Abrasion

ASTM C1803 "Standard Guide for the Determination of Abrasion Resistance of Mortar Surfaces by Rotating Platform Abrasives

ASTM C501 "Standard Test Method for Determining the Relative Abrasion Resistance of Unglazed Porcelain Tile by Tabor Abrasives

ASTM C744 "Standard Specification for Precast Concrete and Calcium Silicate Blocks

ASTM C957 "Standard Specification for Elastomeric Waterproofing Membranes with Integral Wear Surfaces for Cold Liquids with High Solids Content

ASTM D1044《Standard Test Method for Abrasion Resistance of Transparent Plastic Surfaces

ASTM D154 "Guide to Abrasion Tests for Varnishes

ASTM D2205《Standard Guide for the Selection of Tests for Traffic Coatings

ASTM D3389 "Standard Test Method for Abrasion Resistance of Coated Fabrics Double Abrasive Head Rotary Abrasion Tester

ASTM D3451 Standard Guide for the Testing of Powder and Powder Coatings for Paints

ASTM D3489Standard Test Method for Microporous Polyurethane Materials

ASTM D3730 "Standard Guide for the Testing of High Performance Interior Building Wall Coatings

ASTM D3794 "Standard Guide for the Testing of Coil Coatings

ASTM D3884《Standard Guide to the Double Head Abrasion Test Method for Abrasion Resistance of Fabrics

ASTM D4060Standard Test Method for Determining the Abrasion Resistance of Organic Coatings with the Taber Abrasion Tester

ASTM D4685《Standard Test Method for Pile Retention of Corduroy Fabrics

ASTM D4712 "Standard Guide for the Test of Industrial Water-Reducible Coatings

ASTM D5144 Standard Guide for the Standard Use of Protective Coatings for Nuclear Power Plants

ASTM D5146 Standard Guide for the Test of Solvent-Based Architectural Coatings

ASTM D5324 Standard Guide for the Testing of Waterborne Architectural Coatings

ASTM D6037 "Standard Test Method for Dry Wear Damage Resistance of High Gloss Coatings

ASTM D7255 Standard Test Method for Abrasion Resistance of Leather Rotating Platforms Double Abrasive Head Test Method

ASTM E1795 "Standard Specification for Non-Reinforced Liquid Coated Encapsulated Products for Leaded Paint on Buildings

ASTM F1344 Standard Specification for Rubber Floor Tile

ASTM F1478 "Standard Test Method Taber Method for Determination of Image Abrasion Resistance of Copiers and Printers

ASTM F1978 "Standard Test Method for the Measurement of Abrasion Resistance of Thermal Sprayed Metal Coatings by Taber Abrasion Gauge

ASTM F2051 "Standard specification for implantable saline-filled breast prostheses

ASTM F2068 "Standard Specification for Metal Implants for Femoral Prostheses

ASTM F362 "Standard Test Method for Determining the Erasability of Ink Strips

ASTM F510 "Standard Test Method for Determining the Abrasion Resistance of Resilient Floor Coverings by the Abrasive Additive Method

ASTM G195 Standard Guide to Abrasion Testing with a Rotary Platform Abrader

Australian Department of Civil and Environmental Engineering Laboratory Tests for Strength, Hardness and Abrasion Resistance: Notes.

Blu-Ray Disc v1.2 'Blu-ray Disc Read-Only Format. Part 1: Basic Format Specification".

Boeing P.S. 13208 Hard Coating of Aluminium Alloys

BS 3900 'Colour and Varnish Paints. Determination of Abrasion Resistance. Part 1: Rotary Sandpaper Covered Wheel Method

BS 8204-3 'Mortar layers, substrates and cast-in-place floors. Polymer modified cementitious levelling mortars and abrasion resistant mortars.

BS AU 178a 'Specification for safety glazing for road vehicles'

BS EN 13672 'Playing field surfaces. Determination of the abrasion resistance of non-infilled artificial turf'

BS EN 60903 Gloves for Working with Electricity on Insulating Materials

CFFA-1 & 200 Standard Test Methods. Chemically Coated Fabrics and Films

CFFA-P-101C Recommended Minimum Performance Standards for Inground Vinyl Swimming Pool Liners

CID A-A-56032, Military Specification - Epoxy-Based Inks, Markings

CID A-A-59776, Fire Fighting Equipment

CNS K6591 Test Methods for Polyurethane Sports Equipment Materials

CPA WR-01 Standard Test Method for the Evaluation of the Abrasion Resistance of Laminated Decorative Surfaces by Abrasive Wheels

CTS No. 5538 "Abrasion Resistance Taber Abrasives

DIN 52 347 "Inspection of Glass and Plastics. Abrasion test. Method using wear wheels and measurement of scattered light

DIN 53 109 "Inspection of paper and cardboard. Determination of wear by the wear wheel method

DIN 53 754 "Inspection of plastics. Determination of abrasion resistance by abrasive wheels

DIN 53 799 "Aminoplastic resin-based decorative laminates. Test Methods

DIN 68 861 T2 "Furniture Surfaces: Wear Behaviour

DLA1 "Determination of the abrasion resistance of surfaces

DPS 11.04 "Hard Anodised Aluminium

EN 13310 "Kitchen Sinks. Functional requirements and test methods

EN 13329-Annex E "Laminate floor coverings. Surface layer elements based on lambda plastic thermosetting resins. Specifications, requirements and test methods

EN 13696 "Wooden flooring. Test methods for determining elasticity, abrasion resistance and impact resistance

EN 14323 Test Methods for Melamine Panels for Interior Use

EN 14327 "Leather. Physical and mechanical tests. Determination of the abrasion resistance of automotive leather

EN 14354 "Manufactured panels - Wood veneer floor coverings Annex D

EN 14354-Annex D "Wood-based panels. Wood veneer floor coverings

EN 14431 "Enamels and Vitreous Enamels. Characteristics of enamelled coatings on steel sheets for construction purposes

EN 14688 "Sanitary fittings. Washbasins. Functional requirements and test methods

EN 14864 Glass and porcelain with glass fibre coating

EN 14904 "Playing Field Surfaces. Specification for Indoor Surfaces for Multi-Sports Fields

EN 438-2 'High pressure laminated sheets for decorative purposes HPL. Thermoset resin-based sheets. Part 2: Determination of properties

EN 655 "Resilient floor coverings, Specification for cork PVC wear layers for tile attachment compositions

EN 660-2 Resilient Floor Coverings - Determination of Abrasion Resistance - Part 2: Frick-Tabor Test

FDA Metallic Plasma Sprayed Coatings "Industrial Guidance for the Testing of Metallic Plasma Sprayed Coatings on Orthopaedic Implants

Fed. Specification TT-P-0091D Interim Federal Specification - Butylene-Based Rubber Coatings for Concrete Floor Interiors.

Fed. Test Method Std. No. 191A Method 5306.1 "Abrasion Resistance of Cloth: Rotating Platform, Double-Headed Taber Method

Fed. Test Method Std. No. GG-P-455b "Photographic Plate and Foil Sensitised Anodised Aluminium".

IKEA Spec. No. IOS-TM-0002 "Surface Resistance Test Method

IPC-TM-650 "Wear Taber Weld Covers and Conformal Coatings

ISO 10074 "Technical Conditions for Hard Anodized Coatings of Aluminium and its Alloys

ISO 15082 "Safety Glazing of Rigid Plastics for Road Vehicles.