Site: Home > Home > News and events

Does the UV Accelerated Weathering Tester require regular inspection and maintenance?

2022-02-24 09:57

In order to ensure the normal operation of the UV Accelerated Weathering Tester and ensure the normal production, professional technical maintenance personnel and professional operators should cooperate with each other to make the service life of the UV curing lamp reach a certain level. Only by insisting on these basic daily tasks can Satisfy the use effect.

If any abnormal situation is found, the professional and technical personnel responsible for maintenance should report it immediately, and patiently wait for a thorough inspection in front of the professional and technical personnel to rule out the normal situation. Professional maintenance information technology researchers must routinely check the operation and development of the rotating part of the enterprise. If it is not normal, it should be analyzed, adjusted and repaired immediately.

UV Accelerated Weathering Tester

Perform routine maintenance on the UV Accelerated Weathering Tester, replace some worn transmission parts, especially the bearings of the transmission part, thoroughly clean and add special grease, reassemble and adjust, carefully check the installation dimensions of each part, so as to keep the rotating part in operation. Stable and flexible.

Enterprises can carry out comprehensive and careful maintenance of all aspects of the UV Accelerated Weathering Tester in a certain routine cycle, and timely replace the aging UV curing lamps to ensure the necessary ultraviolet radiation intensity for processing and production.

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |