Does the UV Accelerated Weathering Tester have to be regularly checked for maintenance?

The UV Accelerated Weathering Tester manufacturer must routinely perform comprehensive and careful maintenance on all aspects of the UV Accelerated Weathering Tester. The UV curing lamps that have exceeded the life of our network should be replaced in time to ensure the necessary ultraviolet radiation intensity for processing and production.

Perform routine maintenance on the UV Accelerated Weathering Tester, replace some worn transmission parts, especially the bearings of the transmission part, thoroughly clean and add special grease, reassemble and adjust, carefully check the installation dimensions of each part, so as to keep the rotating part in operation. Stable and flexible.

In order to ensure the normal operation of the UV Accelerated Weathering Tester and ensure the normal production, professional technical maintenance personnel and professional operators should cooperate with each other to make the service life of the UV curing lamp reach a certain level. Only by insisting on these basic daily work, To meet the use effect.

If any abnormal situation is found, the professional and technical personnel responsible for maintenance should report it immediately, and patiently wait for a thorough inspection in front of the professional and technical personnel to rule out the normal situation. Professional maintenance information technology researchers must routinely check the operation and development of the rotating part of the enterprise. If it is not normal, it should be analyzed, adjusted and repaired immediately.

For more maintenance information about UV Accelerated Weathering Tester, please follow qinsun instrument!