Site: Home > Home > News and events

Operation Specification of Textile Fiber Tester

2021-11-23 11:54

The textile fiber tester is an instrument that digests samples according to the commonly used acid-base digestion method and performs weight measurement to obtain the crude fiber content of the sample. The crude fiber analyzer uses acid and alkali with accurate concentrations, digests the sample under specific conditions, and then uses ethanol to remove soluble substances. After high-temperature burning, the amount of minerals is deducted, and the content is called crude fiber. The crude fiber analyzer is not an exact chemical entity, but a rough composition measured under generally recognized mandatory conditions. Among them, cellulose is the main component, with a small amount of hemicellulose and lignin.


technical parameter:


Model: AG-CXW-6


Measurement object: the content of crude fiber in various grains, feeds, grains, foods and other agricultural and sideline products.


Number of test samples: 6/time


Repeatability error: crude fiber content is below 10%, absolute value error ≤0.4


The crude fiber content is above 10%, the relative error is ≤4%


Measurement time: about 90 minutes on the instrument (including 30 minutes for acid, 30 minutes for alkali, 30 minutes for suction and washing)


Power supply: AC220V/50HZ


Power: 3.3KVA


Volume: 540*450*670mm


Weight: 28kg


1-211123115512158.jpg



Main features of textile fiber tester:


l The digestion device adopts ceramic heating material, which has good thermal efficiency and can fully obtain the digestion effect.


l All extraction processes can be operated by automatically placing valves, and each sample can be operated independently for the entire set of tests.


l Built-in imported peristaltic pump, corrosion-resistant, vacuum filtering and adjustable vacuum degree, gas can be blown back to accelerate the washing effect.


l The crude fiber analyzer can be equipped with a circulating constant temperature water bath for high-precision temperature control.


l The height of the sample can be upgraded and adjusted to facilitate sampling and discharging.


l The entire experiment process is completed automatically, without manual operation.



Textile fiber tester is widely used in food, feed and other agricultural and sideline products. Used to extract crude fiber, acidic and neutral detergent fiber, cellulose, hemicellulose, lignin, etc. in grains, food, feed, etc., and detect total, soluble and insoluble dietary fiber in food


Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier  Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |