Site: Home > Home > News and events
Comfortable Thermal Manikin has played an important role in the mechanism research and the development of occupational protective clothing. From the structure of the Comfortable Thermal Manikin, the test principle and the application, etc., the Comfortable Thermal Manikin is comprehensively connected. Under all wearing conditions, the clothing reduces the heat loss from the human body to the environment. At present, the Comfortable Thermal Manikin is widely used in the textile and apparel industry. All aspects of the test are very effective.
The Comfortable Thermal Manikin can test detailed data systems. The dummy itself does not have fingers and faces. The dummy has higher strength. A pure nickel wire close to 700m is placed inside the dummy from the fingers to the nasal cavity, which is independent of intelligence. The circuit guarantees the accuracy of the measurement process. The only circuit inside each part ensures the accuracy of the measurement, and the built-in heat conduction system can ensure good uniformity. At the same time, the dummy can be divided into two parts, which is easy to transport.
main application:
In the dangerous environment of the fire field, people need to wear thermal protective clothing to avoid fire damage. Thermal protective clothing is widely used to protect firefighters, steel workers and workers engaged in other high-temperature hazardous situations. As the clothing is exposed to the flame for an increase in time, the surface temperature of the clothing will gradually increase due to the direct burning of the flame, and a large amount of heat transfer causes the air layer under the clothing and the surface temperature of the human body to increase at the same time. Not only will the thermal physical properties of the fabric itself change and affect its thermal protection performance under the flame burning, but also after leaving the flash fire environment, the surface temperature of the clothing will still remain in a higher range, and will be in contact with the clothing underneath. And the temperature of the surface of the human body forms a temperature difference, and the continuous heat transfer causes the surface temperature of the human body to continue to rise. Studies have shown that burns may occur after the flash fire is over, and the energy stored in the fabric is also an important factor in predicting burns. Therefore, even if the thermal protective clothing can withstand the flame burning for a short time, the clothing can still cause burns during the cooling process. Therefore, it is particularly important to study the changes in the surface temperature of clothing and human body after burning.
Research on multi-layer protective clothing using burning dummy shows that the outermost fabric has an important influence on the protective performance of multi-layer protective clothing. Using TPP instrument to test, it is found that long-term exposure to a heat source with low heat flux is more likely to cause burns than short-term violent combustion. In the actual wearing process, the thermal protection performance of clothing not only depends on the performance of the fabric itself, but also needs to be comprehensively considered from the aspects of clothing style design, specifications and dressing posture. In order to simulate the situation of the human body in the actual fire field as realistically as possible and to safely and accurately determine the surface temperature of the clothing and the human body, the test method of the burning dummy has shown its advantages and has been widely used in the field of thermal protection.
The above is the detailed explanation of the Comfortable Thermal Manikin content that QINSUN has answered for you. Of course, if you need to purchase, you are welcome to come to consult.
Copyright 2022:Qinsun Instruments Co., Limited
High-end textile tester supplier Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |