Factory Direct Sales
Quality Assurance
Lightning Delivery
Hassle-free Service
Free Quote
Email
Leave Message
Send message or email info@qinsun-lab.com get favorable prices,reply tu you within 24 hours!
Product Details
The smoke alarm test tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors. Our test tunnels are constructed of stainless steel sheet, are double walled and heat insulated. The inner lining has a cross section of 0.4 x 0.4 m and the outer lining is 0.5 x 0.5 m. The overall length of the channel is approximately 4.20 m, the channel (without frame) is 2.10 m high.
Features
The tunnels are modular and are assembled from replaceable channel segments and elbows. It is thus possible to extend every channel at a later date, e.g. by adding a cooling segment with a pneumatic telescopic refrigeration system.
Accessories
· Thermometer, anemometer and extinction measuring device .
· An aerosol generator with process control computer that regulates the wind speed and temperature in the channel, generates the required concentration and temperature ramps and automatically cleans and cools the channel after each measurement.
· An ionisation measuring instrument (MIC) is not installed as standard. However, the corresponding clamp for installing an MIC is fitted.
Other products for testing according to standard EN 54:
· Aerosol generator AGW/R for standard-compliant particle size distribution
· Extinction measuring device AML
· Orifice apparatus with control unit S00270
· Swing mechanism for determining direction dependence S00269
· Refrigerating set for channel S00294
Features
The tunnels are modular and are assembled from replaceable channel segments and elbows. It is thus possible to extend every channel at a later date, e.g. by adding a cooling segment with a pneumatic telescopic refrigeration system.
Accessories
· Thermometer, anemometer and extinction measuring device .
· An aerosol generator with process control computer that regulates the wind speed and temperature in the channel, generates the required concentration and temperature ramps and automatically cleans and cools the channel after each measurement.
· An ionisation measuring instrument (MIC) is not installed as standard. However, the corresponding clamp for installing an MIC is fitted.
Other products for testing according to standard EN 54:
· Aerosol generator AGW/R for standard-compliant particle size distribution
· Extinction measuring device AML
· Orifice apparatus with control unit S00270
· Swing mechanism for determining direction dependence S00269
· Refrigerating set for channel S00294
Related Products
-
Tensile Strength Testing Equipment for Lea
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
Taber Leather Abrasion Resistance Tester
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
IEC60695 Glow Wire IEC Fire Hazard Testing
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
ASTM D 2863, ISO 4589-2 Automatic Limited
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
ISO105B02 Standard Textiles Xenon Aging La
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
Bag Zipper Reciprocation Pull Fatigue Test
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
ISO 6925 Carpet Flammability Testing Equip
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
-
Portable Mask Breathing Resistance Testing
The Smoke Alarm Test Tunnels are suitable for controlling the quality of optical detectors, ionization detectors and heat detectors.
