Microflow Porometer|Microflow Porometer Manufacturer

Product Details

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.

Operation Principle
In this instrument a pressure transducer is located on the downstream side of the sample and the time rate of pressure change in the known volume of the down stream side of the sample chamber is used to compute very small flow rates. The flow rate through dry samples is measured according to the differential pressure. Under the increasing pressure, the gas flows into the back of the completely wetted samples in the chamber. When the pressure increases enough to overcome the point where the capillary of the liquid works in the hole (maximum hole) , that point is the bubbling point. After confirming the bubbling point, increase the pressure and measure the flow until all the holes are empty and the sample is dry.

Application
The microflow porometer is mainly used to determine the characteristics of low permeability membrane (gas separation membrane). The instrument is suitable for packaging, rubber abd special gas manufacturing companies.
Applied industries：
Automobile manufacturing      Battery separator Ceramics
Filtration   Geofabrics
Nonwoven     Paper
Pharmacy      Textiles

Features
· Samples permitting very low flow rate can be tested
· Very low permeability can be measured
· Fully Automated
· Windows based simple operation
· Provide other optional features

Technical Parameters

Items	Parameters
Pore Size Range	0.013 - 500 microns
Permeability Range	1x 10- 1x 10- (microflow in cc/sec/m/torr)
Sample size	0.5” - 2.5” diameter
Pressure transducer range	0~500psi
Resolution	1 in 20,000
Accuracy	0.15% of reading
Pressurizing gas	Clean, dry, and compressed air or nonflammable and non-corrosive gas
Mass flow transducer range	10cm/minute~500,000cm/minute
Power requirements	110/220VAC，50/60Hz (Others Available)
Dimension	30” H x 19” W x 18.5” D
Weight	100lbs

Related Products

Tensile Strength Testing Equipment for Lea

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
Taber Leather Abrasion Resistance Tester

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
IEC60695 Glow Wire IEC Fire Hazard Testing

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
ASTM D 2863, ISO 4589-2 Automatic Limited

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
ISO105B02 Standard Textiles Xenon Aging La

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
Bag Zipper Reciprocation Pull Fatigue Test

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
ISO 6925 Carpet Flammability Testing Equip

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.
Portable Mask Breathing Resistance Testing

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments.