Leave Message
Send message or email info@qinsun-lab.com get favorable prices,reply tu you within 24 hours!
Description:With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
Items | Parameters |
Volume flow | 5 cm³/min ... 300 l/min during operation |
Pressure | -1 mbar … -900 mbar +1 mbar ... +5000 mbar |
Test air | Pressurized air |
Test air temperature | -40 … 120ºC |
Compressed air supply | 7…8 bar, max. 600 l/min |
Power supply | 230 V AC |
Power consumption | approx. 500 W |
Dimensions (W x D x H) | 200 cm x 90 cm x 110 cm (Height without monitor) |
Weight | approx. 280 kg |
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
With test rigs of series DHP 145 it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure. Overpressure is accomplished with compressed air (from the network), the pressure level is adjusted by means of a proportional valve.
Send message or email info@qinsun-lab.com get favorable prices,reply tu you within 24 hours!
Copyright 2022:Qinsun Instruments Co., Limited
High-end textile tester supplier Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |