Site: Home > Home > Products > Application > Textile & Fabric Apparel Tester

Hydrostatic head Tester

Description: Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

Factory Direct SalesQuality AssuranceLightning DeliveryHassle-free Service
Free Quote
Email
Hydrostatic head Tester

Product Details

  Introduction

  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously raised in a standard atmospheric environment, which is the hydrostatic pressure value of the material. It can quickly and accurately test out the encountered resistance when water penetrates through the material, to assess the material waterproof and moisture permeability.

  Application

  The hydrostatic head tester can be used for waterproof moisture permeability testing of high density fabrics, laminated fabrics, coated fabrics and the so on, such as canvas, felt cloth, tarpaulin, airtight fabric, outdoor sportswear material, umbrella test, waterproof fabric testing, etc .; it can also be used for testing the body fluid permeability and blood permeability of medical protective clothing, the chemical liquid permeability of chemical protective clothing; breathable waterproof non-woven / non-woven fabric, permeability test of filter fabric; it can also be applied to water resistance test for paper and paperboard.

  Feature

  The pneumatic chuck with pressure regulating function, can provide superior clamping force, even under high pressure test condition, there will not occur leakage failure lead to test failure; at the same time ,it can meet the long-term test of the seal; chuck control has two ways to choose, mechanical button control and touch screen control.

  LED observation light with high brightness, good visual in all directions, to ensure that the observation conditions is facilitate to observe and confirm the three drops of water test end point.

  7-inch color screen, capacitive touch screen, multi-point touch operating system, easy to control, multi-language display, switch between Chinese – English language. System with built-in standard, select the corresponding standard number to start the corresponding standard requirements of the dynamic and static test; also includes dynamic and static custom test mode.

  Standards

  AATCC 127 Water Resistance: Hydrostatic Pressure Test

  ASTM F1670 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

  ASTM 903 Standard Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids

  BS 3321 Method for Measurement of the Equivalent Pore Size of Fabrics (Bubble Pressure Test)

  EDANA 120.2-02 Determination of Impermeability

  BS 3424-26 Testing Coated Fabrics - Method for Determination of Resistance to Water Penetration and Surface Wetting

  GB/T 4744 Textiles -Testing and Evaluation of Water Resistance - Hydrostatic Pressure Method

  BS EN 20811 Textiles - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test

  ISO 811 Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test

  ISO 1420 Rubber or Coated Fabrics-Determination of Resistance to Penetration by Water

  FZ/T 01004 Coated Fabrics-Determination of Resistance to Penetration by Water

  YY/T 0700 Clothing for Protection against Liquid Chemicals - Determination of the Resistance of Protective Clothing Materials to Penetration by Liquids under Pressure

  JIS L1092 Testing Methods for Water Resistance of Textiles – Method A (low pressure)/Method B (high pressure)

  Technical Parameters:

  1.Testing pressure: 0-5000mbar(5000cmW.G);

  2.Testing precision: Resolution with 0.1mbar;

  3.Testing area: 100cm(10cm,19.63cm,26cm,28cm optional);

  4.rising rate of pressure: choose according to the standard, also can input the specified value;

  5.Testing units for option: mbar/kPa/Pa/cm w.c /mm w.c;

  6.Maximum thickness of sample: 40mm;

  7.Compressed air: 6-8 bar(clean and dry air);

  8.Alarming time: 0- 9,999 min(also can be set up according to pressure or time);

  9.Pneumatic clamps.

  Basic configuration

  1.Hydrostatic Head Tester;

  2.100 cm 2 Test Head;

  3.Analysis software;

  4.A set of PC test software (optional).

  Accessories

Product numberProduct details
1080101100cm2 fixture set
108010219.63cmfixture set
108010326cm2 fixture set
108010428cmfixture set
1080301silent air compressor


Related Products

  • Fabric Downproof Impact Tester

    Fabric Downproof Impact Tester

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • dynamic fatigue testing machine

    dynamic fatigue testing machine

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • zipper reciprocating fatigue testing machi

    zipper reciprocating fatigue testing machi

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • Shoe Sole Bending Tester

    Shoe Sole Bending Tester

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • Fabric Wear Tester

    Fabric Wear Tester

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • Plastic scratch tester

    Plastic scratch tester

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • Digital Air Permeability Tester for Textil

    Digital Air Permeability Tester for Textil

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

  • Rain Test Chamber

    Rain Test Chamber

     Introduction  The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water droplets side when the water pressure is continuously ra

Leave Message

Send message or email info@qinsun-lab.com get favorable prices,reply tu you within 24 hours!

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier  Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |