Site: Home > Home > News and events

AATCC heavy duty washer

2015-07-17 15:01
Use and attention about the AATCC heavy duty washer
1.Please classify the fabric before washing in order not to affect the test result
2.Add the detergent in the bottom of the?inside?enamel(different type and dosage for different test standard)
3.Add into the test fabrics(pay attention not exceed the the max load)
4.Choose the procedure(different test procedure for different test standard)

5.Choose the load capacity(4 choices: low,middle,high,super high)
6.Choose the temperature(different temperature for different test fabric,please refer to AATCC standard test method)
7.Press the  “start” button to start washing( 2-3 minutes delay in water filling is normal as the system check the loading balance automaticly).

Maintenance of AATCC washer

1.Replace the inlet pipe on a regular base.
2.Please choose the detergent according to standard,avoid excessive use of detergent.
3.Use the hot water or warm water, no use of cold water
4.Keep the lid open,and keep the washer dry.
5.To prolong the life,please clean the machine after the use.

Article from : Shanghai Qingsun Instrument Co.,Limited

Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier | Textile Testing Equipment pdf | Tel:021-67800179 |