Universal testing machine

　　Product Introduction

　　The universal testing machine is made using advanced technology and combines all functions of three different testing equipment that can measure thermal insulation, sound insulation, and mechanical properties. With different designs, configurations, performance, and scalability, it has the characteristics to meet all insulation material testing requirements and provides a comprehensive testing solution. It is an ideal and comprehensive laboratory instrument.

　　Product features

　　(1) The rack is lightweight, has good bending resistance, and the instrument volume is small.

　　(2) A combination device for measuring thermal, mechanical, and acoustic performance, but retaining the precision and accuracy of independent equipment.

　　(3) Easy to operate, intuitive interface, practical and easy to use.

　　(4) All racks are driven by electronic machinery and can respond quickly, making them suitable for different types of tests without the need to reset the entire testing machine.

　　Thermal performance testing

　　Measure the steady-state heat transfer performance, thermal conductivity, and thermal resistance of the flat sample of the material.

　　According to the standard:

　　EN12667 Thermal performance of building materials and products - Determination of thermal resistance using heat protection plates and heat flow meters High and medium heat resistant products

　　ASTM C518 Standard test method for determining steady-state heat flux using a heat flux meter method

　　ISO 8301 thermal insulation Determination of solid-state thermal resistance and related characteristics - Thermal flow measuring instruments

　　Mechanical performance testing

　　The maximum mechanical capacity tested is 20 kN, with a force measurement error of ± 0.5%.

　　According to the standard:

　　EN 826- Compression test

　　EN 1607- Tensile testing

　　EN 12089- Bending test

　　EN 12090- Shear test

　　Chapter A1, A2, A3 of EN 14509

　　Acoustic performance testing

　　The maximum mechanical capacity tested is 20 kN, with a force measurement error of ± 0.5%.

　　According to the standard:

　　EN 29052-1 Acoustics Dynamic sound force measurement - Part 1: Residential floating floor mats

　　ISO 9052 Acoustics Determination of dynamic stiffness - Part 1: Floating floor materials for residential use