Phototherapy bed monitoring table

Product Introduction:

The phototherapy bed monitoring table can measure the UV-B radiation spectrum and UVC radiation medical results.

The instrument displays the hourly UV-B intensity (also known as SUV sunburn ultraviolet) at the minimum erythema dose (MED/Hr), which is recognized as a potential clinical measurement for sunburn. The UVC detector measures the light intensity between 275 nanometers and 285 nanometers and displays UV-C radiation in milliwatts per square centimeter. These measurements are based on the output of the European standard phototherapy bed.

Product application:

Monitor and measure the phototherapy bed by measuring its output volume

Test meter specifications:

Name parameter

UVB (SUV) range 0... 19.99 MED/Hr UVC

Range 0... 19.99 mW/cm2

Resolution 0.01 MED/Hr or mW/cm2

Operating temperature from 0 to 50 ° C

Dynamic range>2 * 105

Precision 2%

FS non-linear maximum 0.02% across all ranges

FS has a maximum of 50 ppm/° C in each temperature coefficient range

Power supply 4XAA nickel cadmium battery or alkaline battery; External 9-12V DC or AC adapter

Size 4 "W x 7.6" H x 1.75 "D (10x19.5x4.5 cm)

Weight 17 ounces (480 grams)

Product features:

Usability

SL-3201 will automatically configure for new sensors when connected. No entry into the program and calibration factors. The settings and algorithms of the detector are encapsulated within the detector. The detector is ready for use with the suitcase.

Convenient portability

SL-3201 has powerful features, but its size can be held by hand. Two detectors can be connected to a 1ft/5ft cable simultaneously for easy measurement. Rechargeable batteries are allowed to run continuously for 30 hours.