How to improve the anti - pilling performance of the fabric
2017-05-12 16:34
The pilling process of the fabric is probably as follows
① due to the mechanical effect of the fiber stretched to the fabric surface, and the formation of hair;
② velvet tangled into the ball, through the fixed fiber and fabric surface connected;
③ in the friction, washing, wearing and cleaning and the process, the continuous mechanical effect of the ball off.
In order to improve the fabric anti-pilling ability, mainly in the following ways
1, choose in the yarn and fabric production process is not easy to play the ball. The following are the same as the ones,
2, in the jet dyeing machine for pre-treatment and dyeing when adding lubricant Lubsoft to prevent friction;
3, in the jet dyeing machine using reactive dyes cotton and polyester / cellulose fiber blended fabric, you can use crystalline sodium sulfate instead of commonly used salt. The following are the same as the ones,
4, the polyester / cellulose fiber and polyester / wool blended fabric with appropriate heat setting, so that the yarn shape, and appropriate over feed. The following are the same as the ones,
5, shearing at the same time bristles, can remove the surface fibers and prominent fibers. The following are the same as the ones,
6, both sides are singeing, can remove the surface fibers and prominent fibers. The following are the same as the ones,
7, for polyester and polyester / cellulose fiber blended fabric, polyester parts of the alkali reduction can reduce the strength of polyester, so easy to remove the ball. The following are the same as the ones,
8, cotton and polyester / cellulose fiber blended fabric, using Cellusof-L; wool or polyester / wool blended fabric with the appropriate biological enzyme for polishing. The following are the same as the ones,
9, the polyester / cellulose fiber, polyester / wool and cotton fabric in the jet dyeing machine with a special agent Saraglow-CL for treatment, clothing with a basket to wash, to remove the surface fibers. The following are the same as the ones,
10, the amount should be appropriate to avoid excessive softness and lubrication, otherwise it will cause the fiber to move to the surface, causing the ball. The following are the same as the ones,
11, the use of special finishing agent finishing, such as: Sarafeel-jy / Sarafeel-763, special silicone compound, can give the fabric softness and through the film to improve the pilling; Sarasoft-MR silicone polymerization finishing agent, There are film-forming properties, can improve wear resistance; Garfinish-As anti-pilling and anti-abrasion characteristics, can be added in the traditional finishing liquid formula.
Free Quote
