Site: Home > Home > News and events

What should be paid attention to when operating the Xenon lamp aging test chamber?

2022-02-21 10:32

Everyone knows that the Xenon lamp aging test chamber is used to reproduce the destructive light waves existing in different environments with a xenon arc lamp that simulates the full sunlight spectrum. It can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control. But do you know what to pay attention to when operating? Next, I will share with you:

1-220221103350592.jpg

1. First confirm whether the equipment is securely grounded;

2. Before using the Xenon lamp aging test chamber for the first time, open the baffle on the upper right side of the box to check whether any components are loose or fall off during transportation;

3. Before the impregnation is baked, it must be dripped dry outside the equipment box and placed in it;

4. The photoelectric sensor of Xenon lamp aging test chamber should keep its natural bending under any circumstances;

5. During trial operation, please observe whether the equipment is abnormal. If there is a slight smell; it is a normal phenomenon;

6. After the test is completed, in order to protect the xenon lamp tube, the xenon lamp aging test box unit adopts the xenon lamp extinguishing delay cooling device. Do not turn off the power immediately after the test.

7. It is forbidden to test explosive, flammable and highly corrosive substances.


The above is all to share with you the precautions for the operation of the Xenon lamp aging test chamber. QINSUN is a high-tech enterprise integrating R&D, production and sales of reliability environmental test equipment. Its products mainly include constant temperature and humidity test chambers, thermal shock test chambers, rapid temperature change test chambers, walk-in environmental test chambers, high-altitude test chambers Low pressure test chamber, composite environmental test chamber, precision hot air oven, vacuum oven, nitrogen oven, LCD aging test chamber, IP level test chamber, vibration table, aging chamber, etc.


Related News

2023-10-26How do you measure oxygen levels in an experiment?
2023-10-26What is ASTM D6413?
2023-10-26What is ASTM D 695 standard test method for compressive properties of rigid plas
2023-10-26What types of construction materials are covered by ASTM standards?
2023-10-25Differences in the testing procedures between ASTM D2863 and ASTM D2863 17
2023-10-25What is the test method for limiting oxygen index?
2023-10-24What is 50% stretch in fabric?
2023-10-24How do you test fabric quality?
2023-10-24How are the materials are tested as per ASTM standards?
2023-10-24Can the oxygen index test be used to compare the fire resistance properties of d

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier  Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |