Site: Home > Home > Products > Property > Other

Integrity Analyzer

Description:The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

Factory Direct SalesQuality AssuranceLightning DeliveryHassle-free Service
Free Quote
Email
Integrity Analyzer

Product Details

The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly Integrity Analyzer features non-destructive testing and can test a wide variety of samples. The integrity test can also measure bubble point.

Operation Principle

A fully wetted sample is placed in the sample chamber and the chamber is sealed. Gas is then allowed to flow into the chamber behind the sample with increasing pressure. A flow meter is located in front of the sample and is used to detect gas flow through the sample prior to any pore being emptied of liquid, thus, the integrity is determined. When the pressure reaches a point that can overcome the capillary action of the liquid within the largest pore, the bubble point has been found. After determination of the bubble point, the pressure is increased and the flow is measured until all pores are empty.

Application

Industries worldwide use the Integrity Analyzer for R&D and quality control. Samples often tested include filter media, membranes, paper and battery separators.

Features

Allows testing of sample under tension, compression, or elevated temperature to simulate actual operating conditions

Determines gas permeability of nearly impermeable samples (microflow permeability)

Windows-based software handles all control, measurement, data collection, and report generation; manual control also possible

Real-time graphical test display depicts testing status and results throughout operation

Nondestructive testing

Length of test less than 30 minutes

Wide range of acceptable sample sizes and types

Transparent sample chamber for visual confirmation

Minimal maintenance required

ItemsParameters
Pore Size Range:0.013 - 500 microns
Permeability Range:1 x 10 - 50 darcies
Sample Size:1.75” - 2.5” diameter
Pressure Range:0 - 500 psi
Pressurizing Gas:Clean dry, and compressed air or non-ammable and non-corrosive gas
Pressure Transducer Range:0 - 500 psi
Resolution:1 in 20,000
Accuracy:0.15% of reading
Mass Flow Transducer Range:10 cm/min - 500,000 cm/min
Power Requirements:110/120 VAC, 50/60 Hz (others available)
Dimensions:30” H x 19” W 18.5” D


Related Products

  • Cyclic Compression Porometer

    Cyclic Compression Porometer

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Integrity Analyzer

    Integrity Analyzer

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Complete Filter Cartridge Analyzer

    Complete Filter Cartridge Analyzer

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Water Vapor Transmission Tester

    Water Vapor Transmission Tester

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Capillary flow porometer Porometer

    Capillary flow porometer Porometer

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Pressure Impulse Test Systems for Producti

    Pressure Impulse Test Systems for Producti

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Aerosol Concentrator

    Aerosol Concentrator

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

  • Fuel Tank Test Bench

    Fuel Tank Test Bench

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly In

Leave Message

Send message or email info@qinsun-lab.com get favorable prices,reply tu you within 24 hours!

Copyright 2022:Qinsun Instruments Co., Limited

High-end textile tester supplier  Email:info@qinsun-lab.com | Textile Testing Equipment pdf | Tel:021-67800179 |